Preview color: Solar Yellow
Limited editionPrismGuard Pro Beckett (BGS) Magnetic Slab Case
Fits standard BGS graded card slabs. Check fit with us
Couldn't load pickup availability
“Love this product! It is a must have for protecting your most prized collection prices!”
BGS size & fit
Measure your graded slab’s height, width and thickness. Check all three against the maximum slab size. Outside dimensions describe the PrismGuard case.
| Dimension | Maximum slab | Outside case |
|---|---|---|
| Height | 131 mm | 137.3 mm5.41 in |
| Width | 84 mm | 89.7 mm3.53 in |
| Thickness | 9 mm | 11.9 mm0.47 in |
View full spec sheet
Not sure your slab will fit? Contact us for fit help
- Trusted by Serious Collectors
- See What Collectors Are Saying
The PrismGuard Pro BGS Magnetic Slab Case adds a colorful aluminum frame, clear viewing panels, and a magnetic closure around your standard Beckett Grading Services (BGS) graded card slab. Display your card and grading label while the card stays sealed in its original holder.
Which Beckett Grading Services (BGS) slabs does this case fit?
This version is designed for standard BGS graded card slabs. Match your case to the grading holder before choosing a color.
For standard PSA holders, choose the PSA case. Do not choose the PSA model for a BGS slab. For unusual, thick, oversized, or older Beckett holders, confirm the exact fit before ordering.
A magnetic outer case for your Beckett slab
- Aluminum frame in 15 color options; availability varies by color.
- Clear panels show the card and grading label.
- Magnetic closure for convenient access to your slab.
- An outer layer of protection for display, storage, and transport.
Does it provide UV protection?
The case is designed to block approximately 95% of UV light exposure. Keep cards out of direct sunlight; a protective case does not eliminate every source of fading or damage.
Is a card or graded slab included?
No. Each case ordered includes one PrismGuard Pro case and cushion strips. Cards and graded slabs shown in product photos are for display and are not included.
Need help choosing a case?
Contact us with your holder type and fit questions, or visit the PrismGuard Pro Help Center. See our shipping policy and return policy for current terms.
How to install your slab
- Open the case and remove the film from both inside panels.
- Place your graded card inside, keeping the slab sealed.
- If needed, remove the slab, apply the included cushion strips as shown in our setup guide, and reinsert it.
- Check that the frame aligns without force, close the case, and remove the film from both outside panels.
Watch the installation video. Cushion strips adjust fit; they do not make an oversized or incompatible holder fit.
Plan a display for your Beckett slab
Measure the complete outer case when choosing a stand or a carrying-box compartment. The PrismGuard Pro PSA Display Stand does not fit this BGS case. Use a support sized for the BGS case, on a flat, stable surface away from direct sunlight.
Compare protection formats
Read the BGS fit and feature guide or compare slab protection for storage, display, and travel. A single-card case does not replace a suitable padded carrying box.
Beckett slab dimensions and UV protection
Compare Beckett (BGS) slab dimensions in millimeters and inches, then check the maximum holder size in the fit table above. Read our guide to Beckett slabs and UV protection to distinguish the bare grading holder from an outer protector. PrismGuard Pro is an independent accessory brand, not Beckett Grading Services.
Still choosing a finish? Explore BGS slab cases and color choices.
What slabs does the PrismGuard Pro BGS Graded Card Protective Case fit?
What slabs does the PrismGuard Pro BGS Graded Card Protective Case fit?
This case is engineered specifically for Beckett Grading Services (BGS) slab dimensions, providing a precise and secure fit for BGS graded cards.
Does this case fit PSA or CGC slabs?
Does this case fit PSA or CGC slabs?
This version is designed for standard BGS graded slabs. For other holders, choose the PSA case or CGC case and check its fit guidance in the Help Center.
Does the BGS case provide UV protection?
Does the BGS case provide UV protection?
Yes. The BGS version blocks approximately 95% of UV light exposure, helping protect graded cards from fading caused by prolonged light exposure.
Is this suitable for long-term protection of high-value cards?
Is this suitable for long-term protection of high-value cards?
Yes. The impact-resistant material and UV-blocking properties make it suitable for serious collectors storing or displaying valuable BGS graded cards.
Help when you need it
Questions about fit or your order? Contact our team.
Returns are accepted within 30 days of delivery for unused products in original condition and packaging. Return shipping is the customer’s responsibility unless the item arrived damaged or defective. Read the full return policy.
